An easy-to-understand, comprehensive guide to Torch Coral care based on over 30 years of reefkeeping experience.
Torch Coral Care at a Glance
These are Lucky Corals husbandry targets, not rigid requirements for every Torch Coral. Gradual acclimation and stable water chemistry matter more than chasing a single number.
Torch Coral Lighting Requirements
Most Torch Corals can be maintained under moderate reef lighting. As a starting point, approximately 75–125 PAR is reasonable, Certain varieties containing gold pigments reach optimal coloration at 150-250 PAR.
Begin new specimens at a conservative intensity and adjust slowly. Rapid paling or bleaching is usually a warning to move the torch into less light.
How to Get the Best Coloration from Torch Corals
Health comes first. A stressed Torch rarely shows its best long-term coloration. Genetics determines which colors a Torch can express, but lighting and acclimation can influence how strongly those colors develop.
Why higher PAR can improve gold coloration
At Lucky Corals, we've observed that some gold Torch strains develop more intense gold coloration at approximately 125 PAR and above. Certain varieties appear to reach their best gold coloration at 200–250 PAR. This is strain-specific, not a target for every Torch Coral.
Increasing light too quickly can bleach a Torch and make it less colorful, not more. Move toward higher PAR gradually over weeks or longer, checking for sustained extension, healthy tissue, and stable coloration. Stop or reverse the increase if the coral becomes noticeably pale or remains contracted.
Some of the most striking gold development we've seen occurs only after a Torch has acclimated to moderately strong light. Other strains do not respond the same way. We prioritize the coral's health over trying to force every specimen into the same PAR range.
Blue-light fluorescence versus true color development
Blue and violet aquarium lighting can make fluorescent pigments appear dramatically brighter. A Torch may look different under white light without having changed its underlying pigmentation. Evaluate color consistently under similar lighting and camera settings when judging whether a husbandry change actually improved it.
Stable water chemistry, suitable water movement, and adequate nutrients support healthy tissue and coloration. Avoid chasing a particular nitrate, phosphate, or trace-element number solely to intensify color.
Water Flow: Strong Movement Is Not Better
Torch tentacles should sway and move freely in moderate, indirect flow. A concentrated jet that whips the tentacles or pushes flesh against the skeleton can cause injury. Flow that is too weak may allow detritus to settle, but increasing flow aggressively is not the solution.
Watch the individual specimen: persistent retraction, tentacles pulled sharply in one direction are reasons to reassess pump or coral placement.
Video: How Much Flow Do Torch Corals Need?
Watch our 3½-minute demonstration of how Torch Corals move under different flow conditions and what to look for when adjusting circulation.
Original Torch Coral flow demonstration filmed at Lucky Corals.
Placement, Torch Gardens & Coral Aggression
Mount Torches securely on rockwork with room for their long tentacles to expand and move. Keep them separated from other coral species that they can sting, including many Hammer and Frogspawn Corals.
Can Torch Corals touch other Torch Corals?
Often they can, but Torches are not universally compatible with one another. In our experience, perhaps 5% of Torches show damaging aggression toward neighboring Torches.
We have not found geographic origin to be a reliable predictor of compatibility. Routinely torches from different regions touch in our systems without issues. Aggressive torches seem to sting neighbors regardless of which region they originate.
Separate the corals promptly if contact causes tissue injury. When we catch aggression in the first several days, the damage is often limited and the injured Torch can recover. Continue monitoring after separation.
Water Chemistry: Consistency Comes First
At Lucky Corals, we maintain our Torch Coral systems near 76–78°F, 8.0 dKH, 1.025–1.026 specific gravity, 400–450 ppm calcium, and 1250–1350 ppm magnesium.
These values are close to natural seawater and the conditions commonly maintained by coral wholesalers and retailers. We recommend similar parameters to minimize acclimation stress and provide conditions corals are already accustomed to.
However, Torch Corals can adapt to a relatively wide range of water parameters. Maintaining stable conditions is generally more important than achieving exact numbers.
Why We Generally Do Not Recommend Target-Feeding Torch Corals
Many Torches react to offered food without actually swallowing it. A feeding response does not prove that the food was consumed. Food that remains trapped among the tentacles or falls into the aquarium can decay and degrade water quality.
For that reason, we generally do not recommend routine target feeding. Healthy Torches obtain much of their energy from their symbiotic algae and can benefit from nutrients and suspended food in an established aquarium.
Acclimating a Newly Shipped Torch Coral
Equalize shipping-container temperature 15-30 minutes before introducing a Torch, then handle it gently during inspection and any appropriate dipping.
Place it where it receives gentle-to-moderate indirect flow and conservative light, then gradually adjust toward its long-term location. Inspect carefully for flatworms and egg deposits before introducing it to an established Torch collection.
Euphyllia-Eating Flatworms: Identification, Myths & Control
Euphyllia-eating flatworms (EEFW) are polyclad flatworms that often hide along the tissue–skeleton boundary, protected beneath a Torch Coral's stinging tentacles. Infested corals may exhibit reduced polyp extension, irritation, or tissue damage.
Carefully inspect the underside and exposed skeleton for flatworms and egg clusters. EEFW eggs are approximately the size of poppy seeds, brown to gold in color, and deposited in clusters.
Video: Identifying Euphyllia-Eating Flatworms and Their Eggs
Watch our original Lucky Corals video on recognizing Euphyllia-eating flatworms and the egg clusters that can remain after coral dipping.
Original Euphyllia-eating flatworm educational video by Lucky Corals.
Three myths that can allow an infestation to persist
MYTH 1 — FLATWORM EXIT TREATS EEFW
Flatworm Exit is ineffective against Euphyllia-eating polyclad flatworms. Products formulated for other types of aquarium flatworms do not effectively treat these larger polyclads.
MYTH 2 — WRASSES WILL ELIMINATE EEFW
Wrasses are not a reliable EEFW-control strategy. These flatworms rarely leave the tissue–skeleton boundary, where they are protected by the coral's stinging tentacles. EEFW are also primarily nocturnal, while commonly kept wrasses hunt during the day. Occasionally eating an exposed flatworm is not the same as eliminating an infestation.
MYTH 3 — CORAL DIPS KILL EEFW EGGS
Coral dips do not kill EEFW eggs. Although dips can dislodge mobile flatworms, surviving eggs can hatch and restart the infestation. It's critical to inspect for and physically remove egg clusters, even when no adult flatworms are visible.
A practical management approach
Inspect new specimens closely, including the tissue–skeleton boundary and egg-bearing areas of the skeleton. Use an appropriate coral dip according to its label to help dislodge mobile flatworms; gentle movement in the dip may help. Locate and physically remove egg deposits where this can be done without injuring healthy tissue.
Quarantine affected specimens when feasible, repeat inspections over time, and address newly emerged flatworms rather than assuming a single dip solved the problem. Avoid introducing a suspect coral into a healthy Euphyllia collection.
Brown Jelly Disease and Other Bacterial Problems
True brown jelly is characterized by very rapid tissue breakdown: a polyp may collapse into a loose, brown, cloud-like mass overnight. This is different from slower tissue recession, which can have several causes. Brown jelly is a descriptive syndrome rather than a diagnosis of one definitively established pathogen.
First priority: contain the deteriorating tissue
At Lucky Corals, our first priority is to keep the brown material out of the aquarium water column. We carefully siphon loose, decaying tissue before removing the affected polyp or head where practical, minimizing the amount of material released into the system. In our experience, prompt containment has sometimes limited an outbreak to one or a few specimens.
Antibiotics: our observations and important limitations
We have also used antibiotic treatment in affected systems. In our experience, ciprofloxacin has appeared relatively well tolerated by many reef organisms and has sometimes been associated with reduced spread. We have used approximately 10 mg per US gallon in aquarium water. We have also used amoxicillin at approximately 25 mg per US gallon as an alternative. These are descriptions of our past practice, not validated or universally safe dosing recommendations; efficacy and impacts on microbiology have not been established by controlled studies.
Antibiotic availability and legal requirements vary by formulation and jurisdiction; ciprofloxacin and human-use amoxicillin require prescriptions in the United States. Seek appropriate veterinary guidance before considering antibiotic treatment. Antibiotics can affect beneficial bacteria and other organisms, and their use should not replace prompt physical containment.
During and after any treatment, monitor ammonia and nitrite for evidence of impaired biofiltration and track nitrate and overall water quality. Correct unsafe conditions promptly with appropriate husbandry measures.
Slower tissue recession is not brown jelly
For suspected slower-progressing bacterial infections, we have sometimes used separate, temperature-controlled antibiotic baths at higher concentrations, repeated daily over approximately a week.
These treatment observations come from firsthand experience at Lucky Corals, not randomized, controlled, or double-blind studies. They should not be interpreted as proof of antibiotic efficacy or safety for every aquarium. Rapid tissue removal and minimizing dispersal remain our most important immediate responses to true brown jelly.
Other Common Torch Coral Problems
Reduced tentacle extension
Check for excessive or direct flow, abrupt lighting changes, unstable chemistry, shipping stress, and pests. Avoid changing several parameters at once.
Bleaching or sudden loss of color
Evaluate PAR and recent acclimation changes. Some gold varieties color up under stronger light, but rapid increases can cause bleaching. Healthy tissue and consistent extension are more important than pushing for maximum brightness.
Localized tissue injury
Look for contact with an aggressive neighbor, tentacles scraping against skeleton, or mechanical damage. Separate incompatible corals and monitor the injured area for worsening recession.
Choosing a Healthy Torch Coral
Look for healthy, intact tissue extending over the skeleton, reasonable polyp extension for the conditions, and no visible pests or egg deposits. Research the seller's handling practices and how they respond to problems. Be cautious about heavily saturated photos or filtered photos.
Named varieties can look different under blue vs white lighting. Our Torch Coral Identification Guide helps compare recognizable traits, while this care guide focuses on keeping the coral healthy and bringing out its natural coloration.
Torch Coral Care FAQs
What PAR is best for Torch Corals?
Approximately 75–200 PAR is a reasonable starting range. Some gold strains develop their best coloration around 200–250 PAR, but only after gradual acclimation.
How can I make a gold Torch more colorful?
Start with healthy tissue and stable conditions. Some strains become more gold above approximately 125 PAR; others do not. Increase light gradually and stop if the coral pales or retracts.
Can two Torch Corals sting each other?
Yes. We have observed damaging aggression in a minority of Torches, perhaps around 5% in our systems. Separate colonies if contact causes tissue injury.
Should I target-feed Torch Corals?
Generally not. Many react to food but do not swallow it, leaving uneaten material that can degrade water quality.
Does Flatworm Exit kill Euphyllia-eating flatworms?
Do not rely on it for EEFW, which are polyclad flatworms. Inspection, removal of mobile flatworms and eggs, and follow-up are critical.
Will a wrasse eliminate EEFW?
Wrasses are not reliable for this purpose. The flatworms shelter beneath stinging tentacles and are often most active at night when wrasses are sleeping.
Do coral dips kill EEFW eggs?
Eggs posses a protective casing resistant to dips. Egg deposits require careful inspection and physical removal.
What should I do if a Torch develops brown jelly?
Act quickly to minimize release of decaying material into the water. Carefully siphon loose tissue and isolate or remove affected heads where feasible. Seek qualified advice about further treatment and monitor water quality.
About the Author — Eric Arnell
Eric Arnell founded Lucky Corals in 2018 and has kept reef aquariums since 1995. His experience includes coral husbandry, aquaculture, sourcing, and evaluating Torch Coral strains. This guide draws on firsthand observations from Lucky Corals' coral systems.